🏷️ Mounting kit for Alumia, Quadra, Silenzio roof bars C290 - Cupra Born 5p 11/21>04/26, Born 5p 05/26>, Volkswagen ID.3 08/20>03/23, ID.3 04/23>

🔒 Vehicle-specific mounting kit for Cupra Born and Volkswagen ID.3 roof bars

🔧 Dedicated mounting solution for vehicles with a standard roof

The C290 mounting kit is the vehicle-specific component required to install compatible Nordrive Alumia, Quadra and Silenzio roof bar systems on the specified Cupra Born 5p and Volkswagen ID.3 models equipped with a standard roof.

The components included in the kit are designed according to the geometry and specific characteristics of the roof of the listed vehicles, allowing the roof bar system to be correctly positioned and securely installed. To select the correct configuration, always check the exact vehicle model, production period and roof type.

🔍 Main benefits of the C290 kit

• Vehicle-specific mounting kit

• Designed for compatible Cupra Born 5p and Volkswagen ID.3 models

• Intended for vehicles with a standard roof

• Compatible with Nordrive Alumia, Quadra and Silenzio ranges

• Components adapted to the specific roof configuration of the vehicle

• Allows the roof bar system to be completed and installed correctly

• Eliminates the need for universal mounting solutions

📦 Package contents

• 1 x C290 mounting kit

• Vehicle-specific mounting components according to the manufacturer's configuration

Important: this product contains the C290 mounting kit. The roof bars and other components required to complete the roof bar system are not included and must be purchased separately.

🔧 Technical specifications

• Product type: roof bar mounting kit

• Kit code: C290

• System brand: Nordrive

• Compatible ranges: Alumia, Quadra, Silenzio

• Compatible roof type: standard roof

• Compatible vehicles: Cupra Born 5p, Volkswagen ID.3

• Application: adapting and installing a compatible roof bar system on the specified vehicles

🚗 Compatibility

⚠️ Maximum load and safe use

The load carried on the roof must comply with both the limits of the roof bar system and the maximum permitted roof load specified by the vehicle manufacturer.

If different load limits apply to the vehicle, roof bars, mounting components or installed accessories, always follow the lowest maximum permitted load.

The total load is calculated by adding:

weight of the roof bars + weight of installed accessories + weight of the transported load

Never exceed the values specified in the roof bar installation instructions or in the vehicle owner's manual.

⚠️ Installation recommendations

Before installation, make sure that your vehicle exactly matches one of the configurations listed in the compatibility table. Carefully check the model, production period and roof type.

Install all components according to the manufacturer's instructions and check that all mounting elements are properly tightened before driving. The mounting points and fasteners should also be inspected periodically during use, particularly before long journeys or after carrying loads.

🔍 Why choose the C290 mounting kit?

A roof bar system must be configured according to the exact characteristics of the vehicle. The C290 is a dedicated mounting kit for the Cupra Born and Volkswagen ID.3 models listed in the compatibility table, providing the specific components required to adapt compatible Nordrive roof bars to the vehicle roof.

Using the correct mounting kit helps ensure proper positioning of the system and prevents the use of components designed for different vehicles or roof configurations.

🔍 Order now

Choose the C290 mounting kit to complete a Nordrive Alumia, Quadra or Silenzio roof bar system for the compatible Cupra Born 5p and Volkswagen ID.3 models. Before ordering, carefully check the vehicle's production period and make sure it is equipped with a standard roof.

❓ Frequently Asked Questions (FAQ)

❓ Which vehicles are compatible with the C290 mounting kit?

The C290 kit is compatible with the Cupra Born 5p for production periods 11/21>04/26 and 05/26>, as well as the Volkswagen ID.3 for production periods 08/20>03/23 and 04/23>, in configurations with a standard roof.

❓ Which roof bar ranges are compatible with the C290 kit?

The kit is designed for compatible roof bar systems from the Nordrive Alumia, Quadra and Silenzio ranges.

❓ Can I use the C290 kit with Silenzio CX roof bars?

No. The listed compatibility applies to the Alumia, Quadra and Silenzio ranges. Silenzio CX systems require the dedicated configuration and components designed specifically for that range.

❓ Are the roof bars included with the C290 kit?

No. This product contains the C290 mounting kit. The roof bars and other components required to complete the system must be purchased separately.

❓ Can the C290 kit be installed on vehicles with other roof types?

Compatibility with other roof configurations should not be assumed. The listed C290 applications are intended for vehicles equipped with a standard roof.

❓ How is the total roof load calculated?

The total load is calculated by adding the weight of the roof bars, the weight of the installed accessories and the weight of the transported load.

❓ Which maximum load limit should I follow?

Always follow the lowest applicable maximum load limit specified for the vehicle and the components of the transport system. Check the roof bar instructions and the vehicle owner's manual before use.